high carbon steel tube
"
16MnDG 10 MnDG 09DG GB / T 18984 คาร์บอนท่อแลกเปลี่ยนความร้อนเหล็กบริการอุณหภูมิต่ำท่อ
GB/T 18984 Seamless Steel Tubes for Low-Temperature Service Piping Spec: Material:16MnDG , 10MnDG , 09DG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12m Tolerance: According to the following tables or customers’ request. Permissible deviation tolerance of OD and WT Classfication Steel size Permissible tolerance W-H OD ＜351 ±1.0%D ≥351 ±1.25%D WT ≤25 ±12.5%S W-C OD ≤30 ±0.20 ＞30~50 ±0.30 ＞50 ±0.75%D WT ≤3 ＋12.5%S -10%S ＞3 ±10%S Steel grade and chemical composition
TORICH GB / T3093 Q345 ท่อเหล็กแรงดันสูงสำหรับเครื่องยนต์ดีเซล
TORICH GB/T3093 Q345 High-Pressure Seamless Steel Tubes For Diesel Engine size:OD:6-530mm WT:0.5-38.1mm Length:1.5-6m Steel Grade And Chemical component Unified digital code Grade Chemical Component(Quality Fraction)/% C Si Mn P S Cr Ni Cu No More Than U20103 10A 0.07~0.13 0.17~0.37 0.35~0.65 0.030 0.030 0.15 0.30 0.20 U20203 20A 0.17~0.23 0.17~0.37 0.35~0.65 0.030 0.030 0.25 0.30 0.20 L03451 Q345A ≤0.20 ≤0.55 1.00~1.60 0.030 0.030 0.30 0.30 0.20 The tolerance of OD and WT
ท่อแลกเปลี่ยนความร้อนเหล็กกล้าคาร์บอนด้วยคาร์บอนแบบไม่มีรอยต่อ - โลหะผสมโมลิบดีนัม - เหล็ก
ASTM A209/A209M Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Carbon Steel Heat Exchanger Tubes Standard: ASTM A209 / A209M Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes,Cold drawn and hot rolled seamless steel tubes for Boiler and Super heater Applications: Boiler, Heat Exchanger, Cold Condensers Size Range: OD:12.7-127mm WT:0.9-12.7mm Steel Grade: T1, T1a, T1b Manufacture: Killed steel material. The tubes are made by seamless process
รอย En10305-2 ท่อเหล็กคาร์บอนรีดเย็น Q345 สำหรับการทำความเย็นอัตโนมัติ
Welded Cold Drawn Carbon Steel Tubes EN10305-2 For Auto Refrigeration Material The material used for the welded cold drawn carbon steel tubes conforming to EN10305-2 for auto refrigeration is carbon steel. Specification The specification for the welded cold drawn carbon steel tubes EN10305-2 for auto refrigeration is as follows: Standard: EN10305-2 Type: Welded Shape: Round Size Range: Customizable Length: Customizable Chemical Composition The chemical composition of the
ท่อแลกเปลี่ยนความร้อนเชื่อมเหล็กกล้าคาร์บอนแบบต้านทานไฟฟ้า ASTM A178 / SA178
ASTM A178/ SA178 Electric Resistance Welded Carbon Steel And Carbon Manganese Steel Boiler And Superheater Tubes Material: Carbon steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirement Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and e ends Heat treatment: After welding, all tubes are heat treated at a temperature of
ASTM A192 ท่อระบายความร้อนแบบท่อแรงดันสูงเหล็กกล้าคาร์บอนท่อแลกเปลี่ยนความร้อนแบบไม่มีตะเข็บดึงเย็น ASTM A192
ASTM A192 Seamless carbon steel boiler tubes for high pressure service Seamless Carbon Steel Boiler Tubes for High-Pressure Service Minimum-Wall-Thickness ASTM A192 Seamless Cold Drawn High Pressure Boilers Carbon Steel Heat Exchanger Tubes Applications: for Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers, Steam Boilers Cold Condensers and High-Pressure Services, High-Temperature Services for Boiler Constructions Size range: O.D.:12.7-168mm W.T.: 1.0-15mm L:
TORICH ASTM A214 ERW ท่อแลกเปลี่ยนความร้อนเหล็กกล้าคาร์บอน 1,000-1200 มม
Products Description TORICH ASTM A214 ERW Carbon Steel Heat-Exchanger and Condenser Tubes Standard ASTM A214, A450 Matrial Q195, Q215, Q235 etc Carbon Steel Size OD: 6.76.2mm WT: 1-20mm Length: 1-12m Manufacture Tubes are made by electric-resistance welding. Surface Condition The finished tubes are free of scale., slight amount of oxidation is not considered as scale Hardness Requirements The tubes shall have a hardness number not exceeding 72HRB. Thermal Treatment: After
SAE J356 รอยท่อเหล็กคาร์บอนต่ำควบคุมด้วยแฟลช 15.88 มม. OD
15.88 mm OD X 1.24 mm Type -A J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading This SAE Standard covers normalized electric-resistance welded flash-controlled single-wall low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, beading, and brazing. Material produced to this specification is not intended to be used for
ASTM A ท่อครีบเหล็กกล้าคาร์บอน 179 ชิ้นสำหรับชิ้นส่วนที่เย็นหรือแห้ง
Fin Tube Type and Material No. Fin Type Fin Material Tube Material 1 Extruded Fin Fin Tube SB209 - B209 Aluminium Alloy 1050 or 1060 SB75 - B75 Copper SA179 - A179 Carbon Steel SA213 - A213 Stainless Steel SB75 - B75 Copper SB111 - B111 Copper Alloy 2 G Fin Fin Tube / Embeded Fin Tube EN573-3 Aluminium Alloy 1050 or 1060 SB152 - B152 Copper 3 L Fin Fin Tube 4 LL Fin Fin Tube 5 KL Fin Fin Tube Fin Tube Details Tube O.D 8-51mm Wall Thickness Please advice Length Usually ≤12mtr
